Tactical Equipment for Military Diving

SINGLE TANK ADAPTER PIECE

Plate to fitting single tank to back plate. Stainless steel or aluminum models. It also can be used to mount twins with double tank straps (not included). Weights: Stainless steel 0.870 kg

The VR-T EVO model can be shipped airfreight, allowing the diver to travel around the world with the dpv and without worrying about logistics. The VR-T EVO model is equipped with a NimH battery that can be charged in 4,5 hours and that allows up to 100 minutes runtime at a cruising speed or 60 minutes at a 65 m/min maximum speed. The VR-T EVO model can be shipped airfreight, allowing the diver to travel around the world with the dpv and without worrying about logistics.

New

ROV ECA H300 MK2

300M ROV FOR UNDERWATER OBSERVATION, INSPECTION AND SURVEILLANCE.

M8 SCREW S.S. 25 MM

Stainless steel M8 screw and 25mm long. To attach the single tank adapter to the back plate.

M8 NUT S.S.

Stailess steel M8 nut. To set at M8 screws.

VR-X EVO DPV

Suex VR-X DPV Scooter: The VR-X EVO model is equipped with a Li-ION battery, perfect for long dives up to 150 minutes at cruising speed or 100 minutes at a maximum speed of 65 m/min. Furthermore, this kind of battery can be charged externally, without removing it from the scooter. A special diving experience up to 101 metres deep can be achieved thanks to the Calypso app, as it allows the diver to check both the motor and the battery status at any moment.

New

ROV ECA H300V

300M OBSERVATION ROV FOR UNDERWATER OPERATIONS.

SOFT CONFORT TECHNICAL HARNESS

TDS Confort Plus Techncial Scuba Diving Harnais: Technical harness for mounting on back plate (not included) with adjustable and removable shoulder straps and all additional components. The set is sold disassembled so that the diver can mount it on his plate adapting it to his measurements and configuration preferences.

XJ-T DPV

Suex XJ-T DPV Scooter: Underwater scooter for technical/professional use with aluminium body. The XJ-T underwater scooter uses a Nimh battery that recharges in just 4.5 hours and offers 75 minutes of autonomy at cruising speed and 35 minutes at a top speed of 85 m/min. The XJ-T can be stored in the aircraft hold for easy transport to any location and in all conditions.

ROV ECA H800

1000M OBSERVATION ROV FOR UNDERWATER OPERATIONS

INOX CONFORT TECHNICAL HARNESS

Tactical harness for mounting on back plate (not included) with adjustable shoulder straps (not removable), and all additional components. The set is sold disassembled so that the diver can mount it on his plate adapting it to his measurements and configuration preferences.

New

XJ-S DPV

Suex XJ-S DPV Scooter: Underwater scooter for technical/professional use with aluminium body. The XJ-S offers high capacity thanks to its Li-ION battery, which is monitored by a special indicator, the Calypso app and the Eron D-1, so the diver has full control over the 185 minutes of autonomy at cruising speed and 85 minutes at full speed (85 m/min) to reach a depth of 200 metres.

BLUEROV2

Ocean research, exploration and adventures are easily accessible with our flagship product, the BlueROV2.

XK DPV

Suex XK DPV Scooter: Durable, high-performance DPV for the most demanding professionals. XK is the DPV for technical/professional use: it enables long-range and cave exploration thanks to its Li-ION battery that offers 330 minutes at cruising speed and 100 minutes at maximum speed (100 m/min). Depths of up to 200 metres can be reached with XK.

ATT-400 ACOUSTIC TARGET TRANSPONDER

The ATT-400 transponder can operate underwater as a pinger or transponder. This underwater acoustic transponder is small and easy to deploy in depths of 1000m. When interrogated by the STI-350, DTI-300 or VADR series acoustic receivers, the ATT-400 provides range and bearing up to 750 meters away. The ATT-400 can also be programmed to operate as a free-running pinger. With a battery life of up to six months, this transponder is ideal for marking equipment and locations in poor visibility.

SINAPSI NOSE FOR SUEX DPV

Sinapsi Nose forSuex DPV: SINAPSI is a special nose for navigation that replaces the standard nose. It is equipped with sophisticated electronics to receive and process underwater navigation data acquired via DPV. The SINAPSI project has required years of increasingly sophisticated research, including many tests and trials to optimise the system using the most exciting, up-to-date technological solutions.

ULB-350 LOW COST LOCATION BEACON

This underwater beacon is a cost effective free-running pinger used for marking equipment and underwater sites to depths of 1,200m. Using a single 9-volt battery, the ULB-350 can send a continuous acoustic signal for up to 60 days or on a programmed time delay for up to three months.

ERON D-1 FOR SUEX DPV

Suex Eron D-1 Dshaboard for Suex Scooter DPV: Dashboard for monitoring and navigation for Suex DPV. Wireless DPV data reception. Can be mounted on DPV holder or worn on the wrist. One-touch function activation. Remaining autonomy in minutes at set speed. DPV battery state of charge. Instantaneous consumption. Water speed (available with Sinapsi nose). Distance travelled in water (available with Sinapsi nose)

DPR-275 DIVER PINGER RECEIVER

This small and rugged handheld diver acoustic receiver with LCD display and signal strength meter can track and locate any acoustic pinger that operates between 5 to 80 kHz.

SEIKA GPS SYSTEM FOR SUEX DPV

Suex brought the GPS signal underwater in wireless mode - SEIKA transmits the position to all ERON D-1s in the water. SEIKA uses an embedded GNSS (Global Navigation Satellite System) receiver within an SMB (Surface Marker Buoy) to capture precise diver position and communicate wireless that position to the Suex Eron D-1 dashboard.

BASIC COMPLETE HARNESS + KNIVE

Complete set contains of: PA harness with grommet, pocket with knife, crotch strap with 1 integrated D-ring and belt stopper, 1x stainless-steel D-ring, 3x stainless-steel D-ring bend, 6x stainless-steel stoppers, stainless-steel buckle, 5 narrow and 1 wide bungees

PRS275 PINGER RECEIVER SYSTEM

The PRS-275 is a diver pinger receiver that can be converted to surface pinger receiver using a separate directional hydrophone and user adjustable staff assembly. The system includes the DPR-275 diver pinger receiver, waterproof headset, adjustable staff assembly with directional hydrophone, cable assembly, and shipping container.

COMPLETE ADJUSTABLE HARNESS + KNIFE

Complete set contains of: PA harness with grommet with integrated: 2x adjustable stainless-steel buckles, 2x stainless-steel D-ring bend and 2x stainless-steel stoppers, 4 narrow and 1 wide bungees

copy of COMPLETE ADJUSTABLE HARNESS + KNIFE